Do You Have A Project We Can Help With?

GET A FREE QUOTE

 General Information

Download Brochure

Brief Description:

Double-action hydraulic brick-making pressing machine of TITAN 600D Series which provides excellent quality of mixture consolidation while forming.

TITAN 600D hydraulic pressing brick making machine was designed to manufacture a wide range of products:

  1. Facing bricks;
  2. Common ceramic bricks;
  3. Big-size blocks;
  4. Paving bricks;
  5. Two-layer terrazzo tiles;
  6. Lego-brick;
  7. Lego-block.

TITAN 600D high-pressure brick making machines have Siemens controller-based control systems, energy-efficient variable pumps, proportional hydraulics, and motion control on the base of magnetostrictive sensors. All of this provides the utmost reliability and positional accuracy.

TITAN brick machines’ advantages:

  • The mechanical part of TITAN 600D brick making machines is designed in a relatively simple way that makes them easy maintenance and setup;
  • TITAN 600D brick making machines are very tough. We use a rugged casting design frame. Bodies of base cylinders are made according to advanced and expensive one-piece forging technology that ensures the absence of defects;
  • TITAN 600D high-pressure brick making machines can produce a wide range of products;
  • TITAN 600D brick making machines have plenty of software protection blocks. The operator does not need to put his hands inside the pressing work area due to the clever design of the pressing machines and its full automation;
  • Pressing machines are controlled by a Siemens controller and provide fully automatic operation mode;
  • Power efficiency. Our brick machines are equipped with an advanced power-efficient Yeoshe Series PV variable axial piston pump;
  • High manufacturing capability. Modification of TITAN 600D pressing machine provides manufacturing capability at the level of 2700 bricks per hour. The operating speed of our new D series of pressing machines is often greater than the operating speed of previous pressing machines exponentially that makes it possible to have a huge growth of manufacturing capability at relatively small investments;
  • High molding pressure. TITAN 600D pressing machine provides a big molding pressure – about 600 ton-force. Such a compaction force is more than sufficient to manufacture a very strong brick;
  • TITAN 600D brick making pressing machines equipped with magnetostrictive sensors that provide split-hair positional accuracy. TITAN D pressing machines are also equipped with proportional hydraulics which makes it possible to provide slow speed sharp positioning with retention of utmost movement rate;
  • Excellent quality of finished products. Bricks that can be manufactured with this machine are of very good geometrical accuracy and strong. We guarantee that the molding pressure of our pressing machines will be about 300 kg/cm2;
  • Innovations in design. There is a lot of innovations in TITAN 600D design which makes it a unique machine on the market;
  • Versatility. You can produce many kinds of bricks and blocks and pressing machine readjustment will take only a few minutes. 

Our Suppliers

We use components only from trusted suppliers!

  • Proportional Hydraulics – Hengli, Bosh-Rexroth, Parker;
  • Oil Pumps – PV series Yeoshe (Taiwan), Parker (Germany), Yuken (Japan);
  • Electrical Components – Schneider;
  • Power Supplies – Mean Well;
  • Linear Motion Sensors – Senspro;
  • Pressure Sensors – Wika;
  • HID Interface – Weinview;
  • Control System – based on Siemens controller;
  • Electric Motors – Siemens;
  • Piping – DIN 3865/DIN EN ISO 8434-4;
  • Hydraulic Valves – standard ISO 4401.

 Technical Specifications  – TITAN 600D

  • Main frame.

    Four-pillar with steel casting beams.

  • Pressing.

    Double-action pressing with mutually approaching rams.

  • Pressing force.

    Up to 600  ton-force

  • Oil pressure.

    • Maximum — 31,5 MPa;
    • Working — 29 Mpa.
  • Master cylinder diameter.

    380 mm.

  • Master cylinders’ design.

    Plunger, main case made of single-piece forged steel

  • High-speed cylinders.

    Two high-speed cylinders.

    Cylinders participate in fast movements and in the pressing process.

  • High-speed cylinders diameter.

    120 mm.

  • Puncheons’ stroke.

    TITAN 600D – 400 mm;

    TITAN 600DH – 520 mm.

  • Valves.

    Proportional (it makes it possible to provide slow speed high-precision positioning).

Brick and block making machine
  • Main oil pump.

    Energy-efficient variable displacement axial piston.

  • Main oil pump output.

    257 liters/minute.

    *Depends on the main oil pump installed.

  • Main drive power.

    55 KW.

    *Depends on the main oil pump installed.

  • Recycling time.

    Starts from 11-12 seconds.

  • Control system.

    Siemens PLC-based, Weinview touchscreen.

  • Movements’ control.

    Magnetostrictive sensor (linear displacement sensor) with an accuracy of + -0.001%.

  • Production capacity.

    Up to 2800 bricks per hour. 

    *Standard bricks in standard conditions.

  • Pressing area.

    TITAN 600D – 1100×250 mm.

    TITAN 600DH/DBH – 1200×780 mm.

    *Press can have modifications with the bigger pressing area.

  • Upon special request can be equipped with:

    • Molds with high wear-resistant lining (tungsten carbide);
    • Chiller based cooling system;
    • Punch heating system.
  • Oil volume.

    1150 liters.

  TITAN 600D – The Scope Of Application

For modular brick making plants.

TITAN 600D series brick presses are recommended for making high-quality bricks using Portland cement and other binding materials. In some cases, modifications of TITAN 600D brick presses with heated tables, moulds and punches can also be used to mould ceramic bricks using a semi-dry method. TITAN 600D high-pressure brick presses have the following advantages:

  1. High performance;
  2. Reliability;
  3. Operation simplicity;
  4. A broad range of press moulds;
  5. High-quality bricks and tiles;
  6. Full automation;
  7. Relatively low investment.

For two-layer terrazzo tiles making plants.

TITAN 600D series brick forming machine can be used for the production of two-layer terrazzo tiles with size up to 600×600 mm. Our tile forming unit is equipped with state-of-the-art servo drives for materials feeding devices and high-precision positioning. TITAN 600DB machines can produce very economical terrazzo tiles due to savings on the second layer which can be produced out of cheap materials.

For mini-brick making plants.

TITAN 600D pressing machines are relatively low-cost, but at the same time, our clients do not need to sacrifice manufacturing capability and quality of finished products. Titan 600D high-pressure brick making machines are great to use on the arrangement of mini brick plants and have the following advantages in this case:

  • Reliability;
  • Perfect mixture compaction;
  • The simplicity of operation;
  • Simplicity in formula selection for raw materials;
  • Fully-automatic operation;
  • Versatility (wide range of different including molds including lego-bricks, e.t.c.);
  • Better product quality compared to all known technologies;
  • High press performance;
  • Relatively small investments.

Briquetting & Compacting Systems.

Machines of the ‘TITAN 600D’ series can be used as briquetting presses for different applications. You can utilize the unsurpassed speed and high pressures generated by them for shaping briquettes of various ore and nonmetallic materials.

TITAN 600D Brick Making Machine Video.

 TITAN 600D Brick Making Machine Pictures

Information Request