Do You Have A Project We Can Help With?

 General Information

Brief Description:

Double-action hydraulic brick-making pressing machine of TITAN 240D Series which provides excellent quality of mixture consolidation while forming.

TITAN 240D hydraulic pressing brick making machine was designed to manufacture a wide range of products:

  1. Facing bricks;
  2. Common ceramic bricks;
  3. Blocks;
  4. Paving flagstones;
  5. Lego-brick;
  6. Lego-block.

TITAN 240D high-pressure brick making machines have Siemens controller-based control systems, energy-efficient variable pumps, proportional hydraulics, and motion control on the base of magnetostrictive sensors. All of this provides the utmost reliability and positional accuracy.

TITAN brick machines’ advantages:

  • The mechanical part of TITAN 240D brick making machines is designed in a relatively simple way that makes them easy maintenance and setup;
  • TITAN 240D brick making machines are very tough. We use a rugged casting design frame. Bodies of base cylinders are made according to advanced and expensive one-piece forging technology that ensures the absence of defects;
  • TITAN 240D high-pressure brick making machines can produce a wide range of products;
  • TITAN 240D brick making machines have plenty of software protection blocks. The operator does not need to put his hands inside the pressing work area due to the clever design of the pressing machines and its full automation;
  • Pressing machines are controlled by a Siemens controller and provide fully automatic operation mode;
  • Power efficiency. Our brick machines are equipped with an advanced power-efficient Yeoshe Series PV variable axial piston pump;
  • High manufacturing capability. Modification of TITAN 240 D pressing machine provides manufacturing capability at the level of 900-1000 bricks per hour. The operating speed of our new D series of pressing machines is often greater than the operating speed of previous pressing machines exponentially that makes it possible to have a huge growth of manufacturing capability at relatively small investments;
  • High molding pressure. TITAN 240D pressing machine provides a big molding pressure – about 240 ton-force. Such a compaction force is more than sufficient to manufacture a very strong brick;
  • TITAN 240D brick making pressing machines equipped with magnetostrictive sensors that provide split-hair positional accuracy. TITAN D pressing machines are also equipped with proportional hydraulics which makes it possible to provide slow speed sharp positioning with retention of utmost movement rate;
  • Excellent quality of finished products. Bricks that can be manufactured with this machine are of very good geometrical accuracy and strong. We guarantee that the molding pressure of our pressing machines will be about 300 kg/cm2;
  • Innovations in design. There is a lot of innovations in TITAN 240D design which makes it a unique machine on the market;
  • Versatility. You can produce many kinds of bricks and blocks and pressing machine readjustment will take only a few minutes. 

People’s Searches

autoclaved block machine autoclaved brick machine autoclave sand-lime brick blind tile machine block brushing block machine block making machine brick machine brick making machinbe brick making machine bricks from tunnel waste brile tile machine calcium-silicate brick machine Calcium Silicate Bricks Making Machine carbonil equipment for brick making equipment for tactile tiles firebrick recycling green brick green cement green hydrogen high-pressure brick machine intensive mixers iron oxide pigments lego-brick machine pigment batching pigment dosing pigment scale sand-lime brick machine sandblasting shotblasting tactile tile making machine tile machine tile making machine tile polishing

Our Suppliers

We use components only from trusted suppliers!

  • Proportional Hydraulics – Hengli, Bosh-Rexroth, Parker;
  • Oil Pumps – PV series Yeoshe (Taiwan), Parker (Germany), Yuken (Japan);
  • Electrical Components – Schneider;
  • Power Supplies – Mean Well;
  • Linear Motion Sensors – Senspro;
  • Pressure Sensors – Wika;
  • HID Interface – Weinview;
  • Control System – based on Siemens controller;
  • Electric Motors – Siemens;
  • Piping – DIN 3865/DIN EN ISO 8434-4;
  • Hydraulic Valves – standard ISO 4401.
Siemens brick machines
Parker Brick Machines
Kuka robots for brick and block making machines
Hengli Brick Machines
Rexroth Hydraulics for Brick and Block Machines

 Technical Specifications  – TITAN 240D

  • Main frame.

    Four-pillar with steel casting beams.

  • Pressing.

    Double-action pressing with mutually approaching rams.

  • Pressing force.

    Up to 240  ton-force

  • Oil pressure.

    • Maximum — 31,5 MPa;
    • Working — 29 Mpa.

  • Master cylinder diameter.

    300 mm.

  • Master cylinders’ design.

    Plunger, main case made of single-piece forged steel

  • High-speed cylinders.

    Two high-speed cylinders.

    Cylinders participate in fast movements and in the pressing process.

  • High-speed cylinders diameter.

    63 mm.

  • Puncheons’ stroke.

    280 mm.

  • Valves.

    Proportional (it makes it possible to provide slow speed high-precision positioning).

Brick making machine - TITAN

  • Main oil pump.

    Energy-efficient variable displacement axial piston.

  • Main oil pump output.

    118 liters/minute.

  • Main drive power.

    22 KW.

    *Depends on the main oil pump installed.

  • Recycling time.

    Starts from 8-10 seconds.

  • Control system.

    Siemens PLC-based, Weinview touchscreen.

  • Movements’ control.

    Magnetostrictive sensor (linear displacement sensor) with an accuracy of + -0.001%.

  • Production capacity.

    Up to 900-1000 bricks per hour.

    *Standard bricks in standard conditions.

  • Pressing area.

    250*260 mm.

     *Press can have modifications with the bigger pressing area.

  • Upon special request can be equipped with:

    • Molds with high wear-resistant lining (tungsten carbide);
    • Chiller based cooling system;
    • Punch heating system.

  • Oil volume.

    800 liters.

  TITAN 240D – The Scope Of Application

For modular brick making plants.

TITAN 240D series brick presses are recommended for making high-quality bricks using Portland cement and other binding materials. In some cases, modifications of TITAN 240D brick presses with heated tables, moulds and punches can also be used to mould ceramic bricks using a semi-dry method. TITAN 240D high-pressure brick presses have the following advantages:

  1. High performance;
  2. Reliability;
  3. Operation simplicity;
  4. A broad range of press moulds;
  5. High-quality bricks and tiles;
  6. Full automation;
  7. Relatively low investment.

For mini-brick making plants.

TITAN 240 D pressing machines are relatively low-cost, but at the same time, our clients do not need to sacrifice manufacturing capability and quality of finished products. Titan 240D high-pressure brick making machines are great to use on the arrangement of mini brick plants and have the following advantages in this case:

  • Reliability;
  • Perfect mixture compaction;
  • The simplicity of operation;
  • Simplicity in formula selection for raw materials;
  • Fully-automatic operation;
  • Versatility (wide range of different including molds including lego-bricks, e.t.c.);
  • Better product quality compared to all known technologies;
  • High press performance;
  • Relatively small investments.

Briquetting & Compacting Systems.

Machines of the ‘TITAN 240D’ series can be used as briquetting presses for different applications. You can utilize the unsurpassed speed and high pressures generated by them for shaping briquettes of various ore and nonmetallic materials.

TITAN 240D Brick Making Machine Video.

 TITAN 240D Brick Making Machine Pictures

Brick making machine
Bricks making machines
Brick making machine - TITAN
Concrete brick machine
Cement brick making machine

Information Request