Do You Have A Project We Can Help With?

 

 General Information

 

Brief Description:

TITAN 130W series tile making machines operate by the wet concrete filtration method (wet concrete press).

The essence of this method is that a definite volume of high humidity fluid mixture is loaded into the press moulds by the dosing unit. Stationary punch is situated from the opposite site and filtering elements (cloth filter and metal mesh) are pulled on the surface of this punch.

Wet concrete has good fluidity and evenly distributes in mixture filling in all elements of the press mould. Mixture flow ends after the closure of press mould by the top punch.

With further pressure increase, the water surplus filtration process starts through meshes fixed on the bottom punch.

When the filtration process ends the product develops early high strength.

TITAN 130 W hydraulic pressing machine was designed to manufacture a wide range of products:

  • Terrazzo tile with sizes 400*400 mm;
  • Send-cement tile;
  • paving slab;
  • other products with size of up to 400*400*40 mm.

TITAN 130W high-pressure brick making machines have industrial controllers based control system. Control system provides high accuracy of end products manufacturing.

TITAN tile making machines’ advantages:

  • The mechanical part of TITAN 130W tile machines is built in a relatively simple way that makes easy maintenance and setup.
  • TITAN 130 W series pressing machines are very tough and can work in difficult environmental conditions.
  • TITAN 130W series pressing machines are capable to manufacture a very wide range of products
  • TITAN 130W pressing machines have plenty of software protection locks.  The operator does not need to put his hands inside the pressing work area due to the clever design of the pressing machines and its full automation.
  • Pressing machines are PLC controlled and provide fully automatic operation mode.
  • High productivity. Modification of TITAN 130W pressing machine provides productivity at the level of 540 square meters per 8-hour shift.
  • High pressing force. TITAN 130W pressing machine provides a big pressing force – about 130 ton-forces. Such pressing force is more than sufficient to manufacture very strong tile and roof tiles.
  • TITAN 130W series pressing machines provide a high accuracy of products.
  • Excellent quality of finished products.
  • Innovations in design. There is a lot of innovations in TITAN 130W design which makes it a unique machine on the market;
  • Versatility. You can produce many kinds of bricks and blocks and pressing machine readjustment will take only a few minutes. 

 

 

 

Our Suppliers

 

 

We use components only from trusted suppliers!

 

  • Proportional Hydraulics – Hengli, Bosh-Rexroth, Parker;
  • Oil Pumps – PV series Yeoshe (Taiwan), Parker (Germany), Yuken (Japan);
  • Electrical Components – Schneider;
  • Power Supplies – Mean Well;
  • Linear Motion Sensors – Senspro;
  • Pressure Sensors – Wika;
  • HID Interface – Weinview;
  • Control System – based on Siemens controller;
  • Electric Motors – Siemens;
  • Piping – DIN 3865/DIN EN ISO 8434-4;
  • Hydraulic Valves – standard ISO 4401.

 

 

 

 Technical Specifications  – TITAN 130W

 

  • Main frame.

    Four-pillar with steel casting beams or welded.

  • Pressing.

    Single-action pressing with filtration.

  • Pressing force.

    Up to 130  ton-force.

  • Dosing unit.

    Adjustable.

  • Valves.

    Discrete directional.

  • Upon special request can be equipped with:

    • Molds with high wear-resistant lining (tungsten carbide);
    • Chiller based cooling system;
    • Punch heating system.
Roofing and Terrazzo Tile Making Machine
  • Main drive power.

    7.5 KW.

    *Depends on the main oil pump installed.

  • Recycling time.

    Starts from 12-14 seconds.

  • Control system.

    PLC-based.

  • Production capacity.

    Up to 7-8 tiles per minute. 

    *Standard tiles in standard conditions.

  • Pressing area.

    400×400 mm.

    *Press can have modifications with the bigger pressing area.

 

  TITAN 130W – The Scope Of Application

 

For modular tile making plants.

TITAN 130W series brick presses are recommended for making high-quality terrazzo tiles manufacturing using Portland cement and other binding materials. In some cases, modifications of TITAN 130W tile presses can be used for the production of the roofing tiles.  TITAN 130W high-pressure tile presses have the following advantages:

  1. High performance;
  2. Reliability;
  3. Operation simplicity;
  4. A broad range of press moulds;
  5. High-quality bricks and tiles;
  6. Full automation;
  7. Relatively low investment.

For mini tile making plants.

TITAN 130W pressing machines are relatively low-cost, but at the same time, our clients do not need to sacrifice manufacturing capability and quality of finished products. Titan 130W high-pressure brick making machines are great to use on the arrangement of mini tile making plants and have the following advantages in this case:

  • Reliability;
  • Perfect mixture compaction;
  • The simplicity of operation;
  • Simplicity in formula selection for raw materials;
  • Fully-automatic operation;
  • Versatility (wide range of different including molds including roofing tiles, terrazzo tiles, e.t.c.);
  • Better product quality compared to all known technologies;
  • High press performance;
  • Relatively small investments.

 

TITAN 130W Tile Making Machine Video.

 

 

 TITAN 130W Tile Making Machine Pictures

 

Information Request