Ideal mixing – ideal result
Our company offers specialized mechanoactivation mixers that improve considerably fine-dispersed raw material mixing quality. We use special mixing technology with raw material mechanoactivation (thick layer grinding). This technology allows to rub thoroughly bonding agent into inert substance. It allows to save considerable amounts of cement and pigments. Moreover, this mixing technology allows to increase the isometricity of the prepared powder particles, what increases greatly the
strength of the finished product.
Optimization of construction and mixing cycles!
Mechanoactivation allows to improve greatly the raw material quality by increasing the particles isometricity extent, removing of oxide films from the particles surface, distributing more evenly the cement particles over the surface of the inert materials. The activated mixture heightens significantly the quality (strength, water permeability, frost-resistance) of the finished product.
That is why we optimized the mixer construction and improved its mixing cycles.
Если хотите узнать больше скачайте!
Подробное описание и технические характеристики
- Mechanoactivators are irreplaceable when low-quality materials such as bank sand or thermoelectric power station carry-over ash are used. In these cases, it is difficult to find better technology for utilization of such raw material.
- When using limestone screening or coquina mining waste products as more high-grade raw material for the inert substance, Titan MA mixers allow to save significant volumes of bonding agent.
- TITAN MA can be used for rubbing of ferric oxide pigment into the mixture.
- This mixer is irreplaceable in small-piece concrete articles production.
[/dt_vc_list][ultimate_spacer height=”90″ height_on_tabs=”90″ height_on_tabs_portrait=”60″ height_on_mob_landscape=”60″ height_on_mob=”60″]
We recommend to see!
Video that demonstrates operations of our mechanoactivator mixer
(Mechanoactivator mixer for hyperpresses)