Building Material Machinery

Technologies available

Hyperpress for Superb Bricks and Paving Tiles

Calcium-silicate Brick and Block

Burned Clay Brick and Block

Wet Concrete Pressing for Floor and Roof Tiles

Hyperpress
Sand-lime brick and block making machines
Robotic stacker for brick machine
Tile making machine

Compressed Earth Block (CEB)

CARBONIL - CO2-neutral Green Blocks

Minipress brick machine
Intensive mixer

Products that can be produced

Facing Bricks

Recommended technologies:

  • Hyperpress;
  • Calcium-Silicate Bricks and Blocks.

Face brick is generally denser, more free of impurities, and it has a more weatherproof (impervious) building facade. In addition, the tolerances for face brick are more exacting to allow the mortar joints to be very uniform. Face brick also tends to have more exacting aesthetic properties with a variety of appearances from additives, firing times, glazes, etc.

For facing brick production we use several kinds of special surface treatment and mechanical processing. We use different splitters, tumblers, washers, and other machines.

Facing Tiles

Recommended technologies:

  • Hyperpress;
  • Wet Concrete Pressing for Floor and Roof Tiles;
  • Calcium-Silicate Bricks and Blocks.

Depending on the period tiling exterior walls used to be quite common in some places, actually. Aesthetically exterior tilework is purely a matter of contemporary taste. Tiled exterior walls make a powerful first impression. Tiling is a much cheaper option as to external wall finishing compared with brickwork.

Our machines can produce very tough tiles due to exterior walls necessitate durable, easy-to-maintain tile with low porosity which can be used outside. We propose different surface processing machines, that leaves your customers with loads of options as to external wall finishing. As long as the exterior walls’ tile meets requirements related to weather-resistance any kind of tile can be properly used — for example split, washed, polished, or tumbled tile. From a practical standpoint if well done the tiling can last centuries.

We produce unique high-output tile making machines. Some of our tile machines can produce colored two-layer facing tiles.

Normal Bricks

Recommended technologies:

  • Hyperpress;
  • Calcium-Silicate Bricks and Blocks;
  • Burned Clay Brick and Block.

Normal or Common brick comparing with facing brick generally is much more irregularly sized and was typically only be used for the interior walls of wall construction and concealed work. In recent decades in urban areas, it became trendy to expose old common brick walls. The main requirement for this brick is low cost and high compression strength. Normal brick is used for self-bearing walls or for filling spaces in monolithic-skeleton (reinforced concrete) buildings. Normal brick made with our high-pressure brick making machines has much higher geometric accuracy and strength compared with other technologies.

Building Blocks

Recommended technologies:

  • Hyperpress;
  • Calcium-Silicate Bricks and Blocks.

Most of our brick presses can produce large-sized building blocks.

The main advantages of our high-pressure block machines in comparison with the conventional vibration block making machines:

  • Higher-strength products;
  • Lower requirements for the stability of the mixture;
  • Automatic self-adjustment of the feeding height of raw materials which results in a stable block’s height;
  • Lower consumption of binding materials (cement, lime);
  • Possibility of direct stacking of blocks in several layers, which saves the number of pallets;
  • Possibility of molding ‘lego-shaped’ blocks.

Partition and Internal Wall Blocks

Recommended technologies:

  • Hyperpress;
  • Calcium-Silicate Bricks and Blocks.

Large-sized partition panels are gaining popularity at the moment. We produce powerful double-action pressing machines with an impressive compression force and feeding height for the production of partition panels for internal walls.

More dense and strong partition panels for internal walls have undeniable advantages in comparison with partition blocks made of AAC:

  • Higher-strength makes it possible to mount wall cabinets;
  • They have a higher degree of sound insulation;
  • The smooth surface needs virtually no plaster;
  • Small thickness, which saves usable living space;
  • High installation speed due to tongue-and-groove joints.

Lego-blocks

Recommended Technologies:

  • Hyperpress.

The production of building lego blocks requires powerful double-action block making machines with a large depth of feeding height. Only such block making machines can provide a sufficient density of the raw block in order to ensure its removal by the automatic stacker. The large lego block is a type of building block that provides the higher speed of the brickwork and additional earthquake resistance of buildings. Lego blocks form a special wall structure, that is interconnected in several planes. We recommend developers from earthquake-prone regions to consider this type of building block in their projects.

Lego-bricks

Recommended Technologies:

  • Hyperpress;
  • Compressed Earth Block (CEB).

Lego brick is a special type of brick, which has tongue-and-groove joints in one or more planes. Lego brick can be made from a variety of raw materials, but the most common binding material in almost all cases is Portland cement. The most important thing in the production of bricks in this format is to ensure geometric accuracy so that the brick is properly locked with adjacent products.

Lego brick has some advantages, which are especially important in regions with a shortage of skilled masons:

  • Easy masonry;
  • Earthquake resistance.

Terrazzo Tiles

Recommended Technologies:

  • Wet Concrete Pressing for Floor and Roof Tiles.

Terrazzo tile is a cheaper alternative to natural stone and repeats its texture. In some cases, the density and other properties of terrazzo tiles exceed the performance of the original stone.

Terrazzo tiles can be used for floors, facades, and paving. Most often, terrazzo tiles are delivered after additional polishing to produce a shiny, glossy surface.

Concrete Roof Tiles

Recommended Technologies:

  • Wet Concrete Pressing for Floor and Roof Tiles

Concrete roof tiles have been produced for quite some time and they successfully compete with traditional ceramic tiles. Keep in mind that the total life-cycle cost of tiles is actually quite low compared to composition shingles, since clay tiles can last for as long as 100 years, while concrete tiles should protect your roof for 50 years plus. Concrete roof tiles have less weight compared to traditional clay tiles, which reduces the load on the rafter system. The durability of cement-sand tiles is comparable to the durability of ceramic tiles, and the cost of its production is much lower.

Paving Tiles

Recommended Technologies:

  • Hyperpress.

We produce a wide variety of paving tile making machines based on high-pressure hydraulic forming presses. Paving bricks made with this technology are much stronger and have a higher density and frost resistance. Requirements as to the raw materials are lower. Our paving tiles making machines can automatically adjust feeding height and keep bricks’ height stable without interference from the side of the operator. Our new brick machines of the TITAN S series can provide you with unprecedented for hydraulic machines capacity and stable quality. It is now possible to produce two-layers colored paving tiles using our patented design almost without lowering production output. Recycling time for colored products can be as low as 6 seconds which sets new industry standards.

Curbstones

Recommended Technologies:

  • Hyperpress;

Wet Concrete Pressing for Floor and Roof Tiles. The road and pavement curbstones made using high-pressure forming with hydraulic presses are of high quality and beautiful appearance. Higher density curbstones made with hydraulic presses can guarantee a much better frost resistance and compression strength.

Non-standard Items

We can design and produce a mold of almost any degree of complexity according to the technical specifications from the side of the client.

Our company has a large number of different specialized steel processing machines, and our engineers have gained rich experience in mold and die manufacturing.

More information about our mold production is available here.