Hydraulic Presses and Production Lines for Bricks, Blocks, Tiles, Refractories and Briquettes
TITAN designs and builds the press — and everything around it: raw-material preparation, mixing, moulds, stacking, curing and surface finishing. From a single machine to a turnkey plant, engineered around your raw material and your output.
TITAN 240D4th-generation hyperpress → - 40–10,000 tf
- press force range
- 750 mm
- product height on GIGA presses
- ISO 9001:2015
- certified quality management
- Worldwide
- installation, training and service
Six press families — one for every pressed product
TITAN D-SeriesDouble-action hyperpressesBricks, blocks, kerbs and pavers from screenings and waste — 80D to the 1,600 tf 1600D.View series → 
TITAN F-SeriesFloating mould table pressesRefractories, technical ceramics, carbon and dense pressed products — 6,300 to 45,000 kN.View series → 
TITAN S-SeriesSingle-action sand-lime pressesFast, simple presses for autoclaved sand-lime bricks and blocks — up to 9,360 bricks/h.View series → 
TITAN W-SeriesPress-filters for wet concreteTerrazzo and paving tiles, roof tiles, slabs and kerbstones — 150 to 1,200 tf.View series → 
TITAN MobileBrick plants that travelTITAN 40S, 120DM and MOBIPRESS — a complete off-grid brick plant in containers.View series → 
TITAN CustomPresses built to orderHydraulic presses from 40 to 10,000 tf, designed around your product and process.View series → Machines our customers choose most
D-SeriesTITAN 240D251 tf high-pressure brick and block machine — the 4th-generation bestseller. 
S-SeriesTITAN 1000S1,050 tf sand-lime press, up to 9,360 bricks per hour. 
D-SeriesTITAN 1600DCustom 1,600 tf giant press for GIGA blocks up to 750 mm high. 
W-SeriesTITAN 320WVVibro-vacuum terrazzo tile press for tiles up to 600 × 600 mm. 
MixersTITAN HYPERMIXIntensive mixers from laboratory size to 12,000-litre production units. 
MobileMOBIPRESSContainerised brick and block plant with its own power, crushing and workshop. Everything for a complete production line
A press is only as good as the mix it receives and the handling that follows. TITAN supplies every machine of the line from one hand — sized to work together, installed and commissioned by one team.
01Material preparationCrushers, screens, dosing and moisture control 02MixersIntensive and mechanical activation mixers 
03Moulds & diesHardened and tungsten-carbide moulds 
04Stacking & packagingGantry and robot stackers, grippers, wrappers 
05Surface refinementPolishing, shot blasting, splitting, washing 
06Curing systemsSteam curing, autoclaves and kilns 
07Hydraulic componentsLarge cylinders and hydraulic power units 
08Large mechanical partsForged, cast and welded parts machined to order Production solutions by material and product
Hyperpress technologyCement-bound bricks and blocks pressed at 20–30 MPa — no kiln. 
Sand-lime bricks & blocksSand and lime pressed and hardened in autoclaves. 
Wet concrete pressingTerrazzo, roof tiles and kerbs from press-filters. 
RefractoriesBricks, blocks and panels for extreme temperatures. 
Burned clay ceramicsClay preparation, pressing and firing. 
Briquetting of wasteMining and metallurgical fines into dense briquettes. 
Industrial waste as raw materialScreenings, slag and rubble become building materials. 
Compressed earth blocksLow-carbon blocks pressed from local soil. Specialists in hydraulic pressing
Hydraulic pressing is all we do. TITAN engineers design presses from 40 to more than 10,000 tf, calculate frames and cylinders, build the hydraulics with Siemens, Bosch Rexroth and Hengli components and program the controls themselves. Through long cooperation with forging and casting plants we machine the very large parts our GIGA presses need.
- Raw materials tested in our laboratory before the line is designed
- ISO 9001:2015 quality management and EU patents
- Installation, training and after-sales service worldwide
- Repair and modernization of presses of any manufacturer
From your raw material to a running plant
- Material testSend samples of your raw material — we test, design the mix and press trial products.
- EngineeringWe size the press, moulds and line to your products and output and prepare the layout.
- Manufacture & deliveryMachines built, tested and shipped with foundation drawings and documentation.
- Installation & trainingTITAN engineers install, commission and train your team on site.
- Service for lifeSpare parts, moulds, remote diagnostics and modernization when you need it.
Understand the technology
Hyperpress: High-Pressure Brick & Block MachineA hyperpress forms bricks and blocks from semi-dry mixes at 24.5 MPa or more. Learn the physics, press construction, operating cycle, sizing and defects. 
Hermetic Press for Wet ConcreteA hermetic press compacts wet concrete in a closed mould and squeezes surplus water out through a filter. Physics, machine design, cycle, mixes and sizing. 
Intensive MixerAn intensive mixer combines a rotating pan with an eccentric high-speed rotor. How it works, its parts, the batch cycle, granulation and how to size one. 
Refractory Press (Refractory Brick Press)A refractory press compacts refractory mixes into dense bricks and shapes. Pressing physics, floating-mould presses, de-airing, sizing, materials and defects. Latest from TITAN
18 Sept 2026 Hyperpressing Explained: How High-Pressure Forming Makes Dense Bricks, Blocks and Tiles Hyperpressing step by step: semi-dry mix, mould filling, forming at 20–30 MPa to 1,800–2,300 kg/m³, ejection and curing — and how to choose a hyperpress. Read more → 
3 Dec 2025 PaneLink Interlocking Tile System: Tile Making Machine for Terrazzo Wall Panels and Permanent Formwork PaneLink: TITAN tile making machine for interlocking terrazzo tiles that form steel-pinned wall shells — permanent formwork filled with reinforced aerated concrete. Read more → 
3 Dec 2025 Mobile Hammer Crusher for Mobile Brick and Block Making Machines A mobile hammer crusher built to pair with mobile brick and block making machines: compact, durable, quick to set up and easy to move between job sites. Read more → 
9 Jul 2025 TITAN Robo-Splitter: Fully Automated Brick Splitting for the 24/7 Plant TITAN Robo-Splitter automates brick splitting with laser-guided pallet scanning, twin Cartesian stackers and PLC control: 1,200 bricks/h, around the clock. Read more → Frequently asked questions
What does TITAN Machinery make?
TITAN Machinery designs and builds hydraulic presses and complete production lines for bricks, blocks, tiles, kerbstones, refractories, sand-lime products and briquettes — together with mixers, dosing, moulds, stackers, surface-refinement machines, curing systems and hydraulic components.
Which press is right for my product?
It depends on the material and the product: D-Series double-action presses for cement-bound bricks and blocks, S-Series for sand-lime bricks, W-Series press-filters for wet-pressed tiles and kerbs, and F-Series floating-table presses for refractories and dense technical products. TITAN engineers test your raw material and size the press to your output.
Can I make bricks from waste or quarry screenings?
Yes. Hyperpressing turns limestone and granite screenings, crushed concrete, slag and many other mineral residues into strong bricks and blocks with a modest amount of cement and no firing.
Does TITAN repair presses from other manufacturers?
Yes. TITAN repairs, retrofits and modernises hydraulic presses of other makes — hydraulics, PLC controls, safety systems and moulds.
Where is TITAN based?
TITAN's head office and production are in Xiamen, China, with a European office in Poland. We deliver, install and service equipment worldwide.
Tell us what you want to produce
Products, raw materials and target output — a TITAN engineer replies within one working day with the right press and line.
